If you are looking for a quick and easy how to make a flush mount tonneau cover then this article will provide you with the details you need. When it comes to selecting a truck tonneau cover, the first thing you need to consider is what type of lid do you want to install? There are folding covers, snap-on models, hinged covers, fiberglass reinforced plastic models, folding tonneau models and many more. Once you determine the type of lid you would like to use you will also need to decide if you want to use a universal or custom fitted lid. You can further determine your choice of lid by deciding on which side you would like to mount the hinges from. This article will provide you with all the information you will need to make the right decision when it comes to how to make a flush mount tonneau cover.

how to make a flush mount tonneau cover

The first step you should take when learning how to make a flush mount tonneau cover is to remove the interior rear view mirror. It is recommended that you do this as part of your repair job. Once you have removed the rear view mirror you will be left with two important pieces of information. These two pieces of information are your bedside rails measurements as well as the height of your bed rails.

Your bed rails measurements will determine the amount of space you will have to fit the cover onto. The easiest way to determine your bed rails measurements is to measure the inside of the bed rails. Use a spirit level to ensure an even reading. Mark the location on your bed rail exactly. This marking will be used later when you add the hardware.

If you are wondering how to make a flush mount tonneau cover without removing the entire cover, the easiest solution is to use a piece of carpet and tack it onto the rail. Once the carpet is in place and secured you can then drill a small hole directly under the carpet. This small hole will allow you to secure the mount to the bed rail.

Once you have your bed rail measured and marked, you will need to purchase the screws and mounting hardware. Although you may think that you need to make numerous trips to the hardware store before you can finally install your new town, it is actually easier to buy the hardware at the hardware store. You can find everything that you need at one place. This will save you time and money. Your how to make a flush mount tonneau cover will also be complete.

Once you have all of the necessary hardware and you have drilled the appropriate holes, you will ready to install the cover. To install the cover simply follow the instructions that are included with the hardware. Many of these hardware stores will even offer to install the cover for you.

The last step in how to make a flush mount tonneau cover is to attach the side gusset to the rails. Once this is done you will be able to access the interior of your vehicle. You will see that the side gusset has two clamps that hold it to the rails. Simply line up the clamp and snap it into place.

As you can see the how to make a flush mount tonneau cover project is fairly simple. If you follow the instructions provided with the hardware you will be able to install the cover in no time. If you prefer, you can also hire a professional to install the cover for you. These custom install companies have the tools, knowledge, and expertise to ensure that the job is done properly.