How to release a canvas Lund tonneau cover when tailgate is stuck is a common question among truck drivers. There are many different reasons as to why a tailgate can become stuck, but the most common reason is poor maintenance. Before you start to worry, read on. You do not have to take apart your cover or drill holes in it to remove it and reattach it again. There are simple ways on how to release a canvas Lund tonneau cover. Let us find out.

how to release a canvas lund tonneau cover when tailgate is stuck

The most common way on how to release a canvas Lund tonneau cover when tailgate is stuck is by opening the top of the cover and lifting it up. However, since this type of covers have metal frames, this can be very difficult. This might require some help from a friend or someone who has a bigger truck.

The second method on how to release a canvas Lund tonneau cover when tailgate is stuck is by using a hydraulic wrench. This is the method that most truck owners use. They attach the cover to the frame with the help of some screws and then tighten them together. They make tightening the screws a little harder than just using the frame.

How to release a canvas Lund tonneau cover when tailgate is stuck using this method is simple. The first thing you need to do is to locate the frame screws through the middle section of the cover. Once you have located the screws, you then need to pry the entire cover off. Once the cover is removed, you then need to locate the ratchet strap. There is usually a screw or a snap ring at the bottom of the strap. Once you have removed this, you can pull the cover off by hand.

The second method on how to release a canvas Lund tonneau cover when tailgate is stuck is by using the hydraulic wrench. This is the method that most truck owners use because it is one of the easier methods to use when securing the cover. What you need to do is to remove the whole cover by hand. Then you just need to attach it to the frame with the help of some ratchet straps or some nuts.

The third method on how to release a canvas Lund tonneau cover when tailgate is stuck is to use the socket head pliers. This is also the method that most truck owners use when securing the cover to the frame. What you need to do first is to remove the whole cover and then you just need to place the flat head Philips screwdriver in the gap between the cover and the frame. Then you need to turn the lock in clockwise. You also have to make sure that the cover is secured in place through the use of the mounting strap. The strap will help to secure the cover to the frame.

The fourth method on how to release a canvas Lund tonneau cover when tailgate is stuck is to use the leverage provided by the tie-down straps provided in the tonneau. You need to twist the straps in a counterclockwise direction and then they should be able to give way on their own. However, you still need to be careful while doing so because you don’t want to break the ties and the cover when trying to pull it off.

The fifth method on how to release a canvas Lund tonneau cover when tailgate is stuck is to use a hammer. You just have to pound them till they break. You need to be careful though when using the hammer since you don’t want it to hit you in the face. The best way to use the hammer is when it is empty. Take out the contents and pound the tonneau cover until it breaks.