If you are looking for some tips on how to repaint vinyl tonneau cover, this article will give you some valuable information. When your tailgate is not looking so hot these days, you may be tempted to just buy a new cover instead of repainting the old one. It might seem like a good idea at the time but it could end up costing you more money in the end.
When you repaint the cover, you are just making it look like it’s new again. However, if you want to have long-lasting protection for your cargo that doesn’t need a whole lot of maintenance, it’s not a good idea to just throw away an old cover and replace it with a new one. Instead, take the following steps to make sure you are protecting the liner but also adding some value to your truck. Here’s what you need to do.
The first thing you want to do is to examine the wear on the cover. You will want to make sure that any creases or rips are covered up before you start anything else. This is important because it allows you to paint over any damage before it shows through, making it look like it’s always been there.
Once the cover is ready for the paint, you want to clean it off completely. It’s important that you don’t leave any dirt or dust on the cover while you are painting it. This could prevent the cover from sticking to the new paint. You can use a vacuum to suck up the extra dirt and dust and then use a brush to remove it.
After you have cleaned off the cover, you will next want to make sure that you prime the cover. You can prime the cover by applying a coat of primer to the entire surface of the cover. This will help the cover dry faster and stick to the new paint. Make sure to use the right primer so that you don’t end up with a cover that’s not even half-way waterproof.
Once you’ve primed the cover, you will be ready to repaint it. This part is actually pretty easy, but you will want to take your time and really ensure that you get the best results. If you mess up on this step, you can end up having a cover that looks terrible and won’t last long. If you’re nervous about painting your cover, you can purchase a cover that’s already primed and ready to go, which will make the whole process go faster and easier.
Once you’ve painted the cover, you will next want to make sure that you set the cover up properly. You will want to make sure that the cover is tight against the frame. If you have excess material sticking out from under the cover, it will not be as waterproof as you would like. If you’re putting an aluminum lid on your cover, you will also want to make sure that it is completely sealed off from the outside. This can be done by either using duct tape or simply setting some sort of weather proof covering down over the lid.
Finally, after everything has dried, you will be ready to install your cover. When you are learning how to repaint vinyl covers, you will want to ensure that you follow the instructions that come with your cover. This will ensure that you have a successful repaint job that lasts for years to come. If you want to learn how to repaint a tonneau cover, this information should prove very helpful!