It is not uncommon for people to get their Tonneau cover fixed but before you attempt to do it yourself, it is wise to learn some useful information on how to repair a tonneau cover. This is one of the most versatile and handy vehicles that can be used on just about any type of vehicle and with so many accessories that are available, people want to make sure they get the best performance possible from it. It is a simple and quick fix that ensures the vehicle continues to look great. The following are some useful tips and steps that will help you understand how to repair a tonneau cover.
The first thing that needs to be done when learning how to repair a cover is to determine what kind of defect it is. There are covers that are made of vinyl and they look very sleek. Some are made of fiberglass, which have a more industrial appeal. Either one looks good but both types need to be properly repaired.
If the cover is made of vinyl, take off the vinyl top first. This includes removing the motor housing and all of its accessories. Remove the locking mechanism and the fiberglass bonnet. Most covers have metal flaps on either side of the flaps which can be removed. Remove the whole cover and the whole assembly, including everything in it.
When learning how to repair covers, it is important to pay attention to the screws and nuts that attach the cover to the bed. After removing the cover, locate and mark the screw locations. Then, use masking tape to hold the screw in place while you work. Once all of the screws are removed, carefully clean the area with a degreaser. Do not reuse the detergent or use it on new covers as this can damage the material.
You may want to consider using some sort of primer before you start working on how to repair a tonneau cover. This helps the cover fit back into its proper position and allows the replacement parts to fit together properly. Primer can be purchased at any automotive parts retailer, as well as some hardware stores. Be sure to follow the instructions closely when applying primer.
Once you have primed the covers, it is time to remove them from their shipping containers. If you are replacing covers that were pre-owned, they should be easier to remove than covers that are new and have already been installed. For covers that are new, there are several options.
Most covers are mounted using stainless steel clips that latch on to the tailgate. To install a new cover, you will need to remove the clips and unscrew the tabs that secure the cover in place. You will need to determine which type of cover you need, whether it is a retractable lid or a tarp/canopy. If you choose the latter, you will also need to purchase an extra retaining snap that will hold the fiberglass in place when it is not needed. You will also need to drill two holes into the side of the container for the screws to attach to.
After the tonneau cover has been installed and the appropriate retaining clips have been attached, you can begin restoring your old truck. If you are unsure how to repair a tonneau cover, consult a professional for assistance. The cost of replacing a cover can be significant, so it is always best to get some advice before you begin. With a little bit of work and a lot of patience, you can easily restore your classic truck to its original look.